电机型号(Motor Size)
ZYT 型号 (size) | 09 机壳号 (housing) | 1 铁芯号 (core) | S 法兰面 (flange) | GN 出轴形状 (shaft) | 180 电压 (voltage) | 18 转速 (speed) | F 附件 (parts) |
Z:直流 (DC) | 06:(3GN) | 1 | S:方型 (quad) | GN:一般螺旋齿轴 (normal helical gear shaft) | 12:12V | 18:1800r/min | F:风扇 (fan) |
Y:永磁 (PM) | 07:(4GN) | 2 | R:圆形 (circular) | GX:加强螺旋齿轴 (reinforced helical gear shaft) | 24:24V | 32:3200r/min | B:双出轴 (double shaft) |
T:铁氧体 (Ferrite) | 08:(5GN) | 3 | WG:铣键槽圆轴 ( keyseat circular shaft ) | 90:90V | 36:3600r/min | M:电磁刹车 (electromagnetic brake) | |
09:(6GN) | 4 | P:铣扁圆轴 (flush circular shaft) | 110:110V | ||||
2(IEC) | 180:180V | ||||||
3(IEC) | 220:220V |
减速机型号(Reductor Size)
4 外型尺寸(overall size) | GN 齿数种类(tine type) | 100 减速比(reduction rate) | B 轴承种类(bearing size) |
2:60MM | GN:一般型 (normal) | 100:1/100 | K/KB:滚珠培林轴承 (ball bearing) |
3:70MM | GX:加强型(reinforced) | 10X:中间减速机 (inter reductor) | B:含油轴承与滚珠轴承共用 (oilite & ball bearing) |
4:80MM | WG:蜗轮、螺杆型 (turbine/screw bolt) | ||
5:90MM |
控制器型号(Controller Size)
A | U | S | 11 | A |
A:1HP-7.5HP | 结构型式 (structural style) | 调压器功能 (governor function) | 电压 (voltage) | 电容安装方式 (capacitor installation mode) |
AB:≤1HP | U:组合型 (combination) | S:速度控制器 (speed controller) | 11:单相110V (single phase) | A:内置式电容器 (integral capacitor) |
B:≤3HP | S:分离型 (separation) | 22:单相220V (single phase) | B:外置式电容器 (outboard capacitor) | |
C:≤1/2HP | 33:数字显示器 (numeroscope) |
Selection Guide
Choosing the right motor, reducer and controller is closely related to the reliable and economic operation of your equipment.
1、 Selection of motor: select the matching power and voltage level according to the service conditions of the equipment;
2、 Selection of reducer: the installation size of reducer is mainly consistent with that of motor. When selecting worm gear reducer, the center distance is the standard;
3、Three, the selection of reduction ratio: according to the speed required by the equipment, for the equipment required to adjust the highest speed of the equipment selected reduction ratio, and then by the governor to the direction of low speed speed.
For example, if the equipment requires 20-35r / min to be adjustable, select 1:36 instead of 1:18 or less.
4、 Selection of governor: select type A, AB, B and C according to the matching motor power, and select other functions according to the equipment use requirements.
5、 Service environmental conditions (in accordance with GB12350-2000 and gb5171-2002)
1. The altitude shall not exceed 1000 meters;
2. The ambient temperature shall not exceed 50 ℃;
3. The relative humidity shall not exceed 90%, and the monthly average minimum temperature of the month shall not be higher than 25 ℃.